FJowners.com

General Category => Parts Wanted => Topic started by: Bantam on July 13, 2018, 10:04:50 AM

Title: FJ1200 3CV Suspension Linkage
Post by: Bantam on July 13, 2018, 10:04:50 AM
Looking for a decent linkage, not the dog bones but the main linkage.
I could do with good bearings and pins that are not marked.
Tried e-bay but all over priced and the one I did buy was in worse condition than mine.
Otherwise I'll be turning my own pins and bronze bushing.
I'm in North Wales
Title: Re: FJ1200 3CV Suspension Linkage
Post by: red on July 13, 2018, 01:55:43 PM
Quote from: Bantam on July 13, 2018, 10:04:50 AMLooking for a decent linkage, not the dog bones but the main linkage.  I could do with good bearings and pins that are not marked.  Tried e-bay but all over priced and the one I did buy was in worse condition than mine.  Otherwise I'll be turning my own pins and bronze bushing.  I'm in North Wales.
Bantam,

Hang tough for a moment.  Certainly you can make your own parts, but people here have mixed and matched available Honda roller bearings to replace the Yamaha hardware in the shock linkage.  Those guys may chime in here, or you may need to do a Search here for the Part Numbers.

Good luck.
.