Modifications

Pages: 1 [2] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ... 118 Go Down

	Subject	Started by		Replies	Views	Last post
1 Member and 25 Guests are viewing this board.
	f4i rear shock mod questions 85 fj11 for those who have done it, mine came today... 24000 milesi don't even know what the measurements are for the stock rear shockb...		mtc	4	333	April 13, 2019, 01:20:20 PM by GhostMerc
	XJR engine on 1200Fj 3CX Hello,I have a 3CX FJ with a side car with 170000 kilometers now. As my engine is a bit old, and buy a new side car in france is...		sam95	8	2226	April 07, 2019, 09:45:20 PM by andresmanuel
	Gas tank from a 1100 to a 1tx plug and play? Hi FJ-fansDoes someone knows if a FJ1100 gas tank goes with the 1TX plug and play or if there are modifications to do? Greezefej...		efejota	2	155	April 01, 2019, 01:11:02 PM by efejota
	Installing RPM exhaust « 1 2 » Hey guys, for those of you that have installed RPM's exhaust, how long did the conversion take? I'd like to know how much time ...		Tuned forks	18	734	April 01, 2019, 11:45:25 AM by ryanschoebel
	Anyone fitted EFI to an FJ? Wondering if anyone has fitted EFI to their FJ?I’m thinking all the gubbings from a late XJR might fit without being too much of...		Little Pink Steve	13	478	April 01, 2019, 08:17:30 AM by GS Jockey
	how to set up preload spacer for race tech springs fj11 1985? i spoke to them, but still unsure, does anyone have pictures i know i am asking for a lot, but hoping to get lucky		mtc	1	113	March 31, 2019, 01:30:24 PM by mtc
	Pushing on with the mods and maint. Well got the shock with a 17kg spring fitted. Hardened chrome shaft and re valved to suit. So fitting it up and I looked at the ...		roverfj1200	3	257	March 30, 2019, 04:35:25 PM by Troyskie
	Horsepower Vs. Weight So, with the recent question about horsepower gains of installing the RPM exhaust over stock and the light-hearted gains posted,...		racerrad8	9	303	March 24, 2019, 04:54:33 PM by ZOA NOM
	Fit the YZF rim. As many know I picked up a YZF 5" rim to fit the pick strip. I was going to get everything machined but found myself with someti...		roverfj1200	2	215	March 23, 2019, 01:29:26 PM by aviationfred
	Anti dive/speedo « 1 2 » Hi I have taken the brakes lines off my 1986 FJ1200 and ran dual lines cutting out the splitter and anti dive. Do I have to bloc...		Scottie1	25	1020	March 22, 2019, 01:55:34 AM by Alf
	Kerker slip ons, with a twist! « 1 2 » The oem muffs on my 89 are on thier last legs. I’ve repaired them a couple times, but on top of that, they’re not even the right...		great white	19	686	March 20, 2019, 03:24:26 PM by great white
	Starting the wheel swap « 1 2 3 » Just starting to fit the R62 (17x5.5) rear:Tire is junk, but it holds air and will do for mock up purposes.Next is to machine th...		great white	44	1307	March 20, 2019, 12:08:48 PM by great white
	Time for brakes! « 1 2 3 » Well, if you've read my other posts, you know I'm neck deep in mods/resto mode. I had a set of gold monoblock calipers set aside...		great white	34	1109	March 18, 2019, 06:51:45 PM by great white
	Another FZ1 swingarm, but a little different too..... « 1 2 3 » With my FJ12 laid up for long term work, I'm looking at doing a 1st gen FZ1 swingarm installation. I just put some Kerkers on it...		great white	32	1119	March 18, 2019, 02:41:11 PM by great white
	gonna try building a custom shock.....sorta. « 1 2 3 » First of all, I've got all these parts lying around already from other projects so it costs me nothing more than some time in th...		great white	38	1175	March 17, 2019, 04:26:50 PM by great white
	Fix fried TDI (CDI) for under $20 Feel free to move this thread where it belongs admins.I bought my '85 FJ1100 in March of last year. The installed Rick's regula...		Miker	2	179	March 17, 2019, 03:14:59 PM by Miker
	Dog bone length « 1 2 » GentlemanI noticed recently that my rear tire has contacted the inner fender on both sides (a lot) just forward of the fender mo...		roortcloud	19	554	March 11, 2019, 12:29:12 PM by racerrad8
	Hayabusa buckets and shims So, I've been led to believe that Suzuki Hayabusa,buckets and valve retainers can be used on an Fj head to facilitate shim under...		Indiana jones	2	238	March 10, 2019, 02:42:30 AM by Pat Conlon
	romove the spring on the oem rear shock? OK, I feel a little stupid asking this, but how do you get the Spring off the OEM shock?I've got the spring compressed on my 89 ...		great white	1	121	March 08, 2019, 06:35:26 PM by great white
	Front end swap I have just swapped out the front end for a 1992 complete front and the axel bolt fits good but I can’t get a cotter pin through...		Scottie1	4	270	March 05, 2019, 12:58:28 AM by krusty

Pages: 1 [2] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ... 118 Go Up

Topic you have posted in

Normal Topic

Hot Topic (More than 15 replies)

Very Hot Topic (More than 25 replies)

Locked Topic

Sticky Topic

Poll

Jump to:

Your membership helps support the hosting costs of the forum
There are several levels of membership that offers other privileges.
Click here to see the various membership levels.