| Pages: 1 2 3 4 5 6 7 8 9 10 [11] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 ... 33 Go Down |
|
| Subject | Started by | Replies | Views | Last post ![]() |
|||
| 0 Members and 1 Guest are viewing this board. | |||||||
|
|
I need a fairing for a 89 in Australia
Hey Guys
Anyone down under got a front fairing to fit a 89
Darran
|
oz.fj | 2 | 204 |
by miked |
|
|
|
if in need of FJ fairings look here just found a drag race fj fairing read on !
Hi All I need every one to call Ben BeasleyOrder Line 800-745-5886They make dragrace fairings for the FJ1200 full body they said...
|
tecnomike | 2 | 299 |
by fj1289 |
|
|
|
FJ 1200 Oil filter cover needed
I have a '92 FJ 1200 and I need the oil filter cover if anyone has one laying around on an old motor. Please help/ I over tighte...
|
ButtButter | 3 | 250 |
by racerrad8 |
|
|
|
86 fj1200
« 1 2 »
im looking for a few parts here im on a cheap budget and may not be able to afford some of these right nowim looking for an afte...
|
moonrunnah | 25 | 839 |
by moonrunnah |
|
|
|
86 windshield
Has anyone installed a Zero Gravity on there bike? Which one was used and where is a good place to pick one up?
|
CanuckFJ | 3 | 248 |
by cyclenutk75 |
|
|
|
Now, I need a mirror...
Well today, while my son was moving my bike, it decided to rollover so that it could have his belly rubbed...Oh, wait that's the...
|
racerrad8 | 8 | 379 |
by Shaun |
|
|
|
Fork Brace
Anyone know who makes a fork brace for an 86 Fj?
|
CanuckFJ | 3 | 166 |
by Mark Olson |
|
|
|
Need Lower Cowling
I need the oil pan cowling or lower cowling for my FJ
|
mikemach1 | 9 | 478 |
by FJmonkey |
|
|
|
INSTRUMENT CLUSTER
any one have a INSTRUMENT CLUSTER for a descent price that they would be willing to part with.My speedometer is acting up not sh...
|
winddancer | 5 | 278 |
by Flying Scotsman |
|
|
|
I need a few '92 0r '93 Parts in Oklahoma
I need the black plastic isert that goes at the bottom of the left airscoop, I also could use a left airscoop if anyone has one ...
|
ButtButter | 1 | 136 |
by oldktmdude |
|
|
|
WTB: Front axle for '89-'93 FJ1200 (Illinois)
I started my late-model fork lower/blue spot caliper upgrade on my '84 and just realized that the later forks use a different ax...
|
TheRadBaron | 0 | 141 |
by TheRadBaron |
|
|
|
fairing
does anyone know where i can get the bottom fairing/cowelling? and also there is little balck things over the bolts of the side ...
|
moonrunnah | 2 | 209 |
by moonrunnah |
|
|
|
I need a Collector bolt & rubber
Anybody? I noticed that my exhaust was bit sloppy, only to discover that the rear bolt that had held the exhaust collector to t...
|
simi_ed | 1 | 211 |
by moparman70 |
|
|
|
1992 Front Turn Signal
I need a left side front tunsignal housing and lens for a '92 FJ. The older ones are a different shape and I am unable to find o...
|
ButtButter | 0 | 158 |
by ButtButter |
|
|
|
94 throttle push cable needed
Hi everyone, Yamaha here in Australia have only ever sold 2 throttle cables for an FJ They reckon they don't break I reckon t...
|
Horse | 7 | 302 |
by fj11.5 |
|
|
|
Front Mudguard Fender
Does anyone have a front mudguard fender for sale for an ' 87 ?
|
terryk | 3 | 168 |
by moparman70 |
|
|
|
Clutch cover wanted - Minnesota
Anyone have a decent clutch cover they want to part with? One without a hole where the brake lever poked through
|
Dads_FJ | 2 | 187 |
by Dads_FJ |
|
|
|
RH SIDE PLASTIC UPPER FAIRING COVER FOR MY 93 FJ1200
I need the above part for my bike and have been to various Calgary Yamaha dealers to get it.The real yamaha part number 3XW-283...
|
mickboyle | 9 | 549 |
by fj11.5 |
|
|
|
Wanted: ONE '89+ FJ1200 fork lower
I'm working on the caliper upgrade on my '84 and one of the sliders on the used '90 forks that I got is scrap. I have everythin...
|
TheRadBaron | 1 | 207 |
by TheRadBaron |
|
|
|
Mufflers
Looking for stock mufflers for an 1986 FJ-1200S. Excellent to good condition. One or both. Is any body setting on a set? Thanks ...
|
FJdave1200 | 1 | 173 |
by Steve_in_Florida |
|
| Pages: 1 2 3 4 5 6 7 8 9 10 [11] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 ... 33 Go Up |
|
Topic you have posted in Normal Topic Hot Topic (More than 15 replies) Very Hot Topic (More than 25 replies)
|
Poll
|
Powered by SMF 1.1.10 :: SMF © 2006-2009, Simple Machines LLC


Topic you have posted in
Hot Topic (More than 15 replies)