Sooo, after spending a good part of the day reassembling my '92 FJ (new rear sub-frame) I decided to take her out for a little s...

Hello, i am a newbie here and have a question about a squeaking noise.when I pull my clutchlever it dis sapears.Does somebody kn...

Just went to fire the old girl up and got a click. Battery dead and has hot spots in it. I guess I will be getting a new one. Go...

Hello all, so recently my FJ has developed an issue, it seems to start when the bike is warm but that may just be because I don'...

I'm chasing a high rpm studder on my '84. The bike starts and runs fine (really good actually) until above 7.5k rpm where a inte...

Last year while out enjoying the FJ one last time before winter, I came up on a turn that for whatever reason I wasn't prepared ...

I got '84 1100. My mixture is set at 2.5 out on 1&4. 2.75 out on 2&3. I believe Yamaha suggests only 2 turns out but it feels li...

Hi. I have an issue with the starter motor for my '93 ABS. I have searched the forums but to no avail. When I press the starter ...

Gentlemen, Looking for second opinion...I just un-wrapped mine from its winter hibernation...all seemed well..except while testi...

I've trawled the boards and the internet and cannot seem to find the answer to my question about the clutch spring...so the ques...

I'm almost home free no more oil leaking, the carbs are synced but cold full choke she will start right up and idle at 1100rpm,o...

Hi all My FJ 1200 from 1992 rested for 4 years in the garage. After that I had fixed some issues and was driving her about 10km....

Ok so alot of the problems  I was having we have resolved thanks to some great suggestions from you guys bike is running better ...

Hello. Can anyone tell me what is a normal temp reading for my bike. I bought one of those infrared thermometers and pointed it ...

Hi guys, I feel like I have hit the wall   installed the new master cylinder rebuild kit and removed the 2 front calipers had to...

Hello, Brass Emulsion Tubes how critical are these, and what symptoms do they exhibit if they're clogged?I cleaned and adjusted ...

I am hoping that someone has done this mod and ran into this same issue.I have a '89 U.S. Spec bike and installed a '91 U.K. Spe...

Runs great after first start. Then after warms up it runs like crap. After maybe 3 miles or less. Starts cutting out, backfiring...

 Well with this deep freeze finally behind us up here I was able to heat up the shop and warm the bikes up for multiple hrs befo...

Well as some of you know I have been doing alot of work to my 91' fj1200 I have the motor all back together and back in the bike...