I hope all my USA counterparts had a good memorial weekend!  The significance of this post is that this was the first ride after...

Hello Randy and RPM Team,  I'm sure you have answered this before Randy, but could you let me know how the freight is calculated...

Ordered my Christmas on the 21st so my little girls could wrap Daddy's present's by Christmas Eve. Package arrive 2 days later f...

Wow, Hay that was fast delivery. 3 day from Ca. to Me. I'm fishing lobster 6 12's and relying on my bike to get to the shore. I ...

Glenn has been a great local resource for Aussies on the South Coast NSW for many years, and a genuine Yamaha specialist. He's r...

I just want to thank Robert for getting me a throttle cable in time for my 5 day trip which starts tomorrow.  I found the proble...

Randy answered my call today, when I was 1,200 miles into my Colorado trip. I was stumped by an electrical problem, that I have ...

I was looking for a plug to fit the FJR clutch master switch. Eastern Beaver has a $20 order minimum, and Cycle Connectors is cl...

I thought I'd give a shout-out to my favorite local shop. http://gomotomn.comThis is the closest motorcycle shop to me geographi...

My coils came in today and there in the bike. She started right up and sounded good but no chance for a test drive today. We got...

+1 for BikeMaster! http://www.bikemaster.comI've had their tire gauge:for quite a while. Lately, it stopped registering when pre...

I recently bought a set of Handle bar risers from RPM.I ordered the set  late Friday, had an immediate response acknowledging my...

   If you're thinking your FJ might need a carburetor rebuild, get off the fence and get them over to Randy and the crew at RPM....

I am not affiliated, just a customer for the last 3 years. my last set of Motions cost me $190 to my door. I go shopping for a f...

Got my 5 valve shims in today. Great price, probably saved a ten spot.   Thanks RPM, Joe

Got my box of goodies from Randy in seven days, great prices, fast postage, and reasonable shipping costs. the only bad thing w...

Here's my story:Last weekend my wife and I and a few of our friends went on a 4-day motorcycle trip up to Midland, ON and toured...

Randy, I don't know how you did it but THANK YOU!Was a little concerned that the parts wouldn't be here for the Manshed day.As u...

RPM's FJ1200, XJ1200, XJR 1300: Yamaha BS36 Mikuni FJ adjustable main jet needle set definitely fits my 85 fj1100. Using the sec...

I have purchased a few RPM products over the last 2 years. Oil Filter adaptor, Oil Cooler, LED tail lights just to name a few. I...