News:

           Enjoy your FJ


Main Menu

Hepco & Becker FJ1100 Installation Photos

Started by Karlsefni, September 04, 2014, 12:56:29 AM

Previous topic - Next topic

Karlsefni

Does anyone have close up photos of the Hepco & Becker racks installed on their FJ1100.

I have the set and the Instructions (Google translated) and they leave a lot to be desired, if someone with the racks installed could post some close up photos of the connection points that would be helpful.

I would settle for FJ1200 Photos as well.
Current         Past
'84 FJ1100    '85 FJ1100
                    '92 Virago XV1100
                    '82 Maxim XJ650

aviationfred

My Hepco & Becker frame is from a 1993 1200 that is used on a 1989 1200. Your mount points may be different on the 1100.

Here are a few photos.

The upper circle has a Hepco mount point where the small plastic fairing strip bolts to the sub frame.

The lower circle has the Hepco mount point to the passenger foot peg, or exhaust mount.




The 'U' shaped bracket mounts to the OEM turn signal bracket mount

<a href="http://s119.photobucket.com/user/aviationfred/media/IMAG0760_zpsdf684e1c.jpg.html" target="_blank"><img src="http://i119.photobucket.com/albums/o145/aviationfred/IMAG0760_zpsdf684e1c.jpg" border="0" alt=" photo IMAG0760_zpsdf684e1c.jpg"/></a>

The OEM tag bracket must be removed from the fender and the tag mounts to the Hepco rear cross member.




Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

Karlsefni

Fred;

Thanks for the photos, that helps get me going in the right direction.

Terry
Current         Past
'84 FJ1100    '85 FJ1100
                    '92 Virago XV1100
                    '82 Maxim XJ650