News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Any advice on tuning carbs

Started by FjFighter86, April 27, 2015, 01:27:48 PM

Previous topic - Next topic

FjFighter86

Just put these individual filters on, know that I gotta rejet, but any advice from experience would be appreciated.

Pat Conlon

Quote from: FjFighter86 on April 27, 2015, 01:27:48 PM
Just put these individual filters on, but any advice from experience would be appreciated.

I have not had good luck with K&N style individual paper filters for 2 reasons:
1) I had problems with the #1 and #4 filters staying on and
2) they didn't filter worth a shit.. I would oil them, and a week later they would be dry.

Lot's of discussion on this forum if you search. Just to get you started: http://www.fjowners.com/index.php?topic=3889.0

I recommend that you throw those paper filters away and 1) go back to your stock airbox (K&N filter panel is fine in the airbox) or 2) install UniPod foam filters.
http://www.rpmracingca.com/proddetail.asp?prod=Carb%3ARPMPod&cat=39
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Mark Olson

My advise is to read the thread Pat linked in his post .

It looks like you are running with no mufflers on a bobbed tail fj.  If you are strictly using this for drag racing go big on the mains .

Maybe 44 pilot jets with 120 mains. 
Mark O.
86 fj1200
sac ca.

                           " Get off your ass and Ride"

FjFighter86

Quote from: Pat Conlon on April 27, 2015, 04:10:27 PM
Quote from: FjFighter86 on April 27, 2015, 01:27:48 PM
Just put these individual filters on, but any advice from experience would be appreciated.

I have not had good luck with K&N style individual paper filters for 2 reasons:
1) I had problems with the #1 and #4 filters staying on and
2) they didn't filter worth a shit.. I would oil them, and a week later they would be dry.

Lot's of discussion on this forum if you search. Just to get you started: http://www.fjowners.com/index.php?topic=3889.0

I recommend that you throw those paper filters away and 1) go back to your stock airbox (K&N filter panel is fine in the airbox) or 2) install UniPod foam filters.
http://www.rpmracingca.com/proddetail.asp?prod=Carb%3ARPMPod&cat=39

Appreciate the link and I'll try these for a little while they might be just as bad but they're non oil filters. I'll order some foam ones for when I find out you're right lol.

FjFighter86


My advise is to read the thread Pat linked in his post .

It looks like you are running with no mufflers on a bobbed tail fj.  If you are strictly using this for drag racing go big on the mains .

Maybe 44 pilot jets with 120 mains. 
[/quote]

Not strictly drag just different. I am running MotoGP shorty exhaust although they don't do much muffling. More of a weekend rider than a track bike, but I'd like a streetable tune but aggressive enough for track days. Again appreciate the advice.

Mark Olson

http://www.fjowners.com/index.php?topic=1974.msg15733#msg15733


This may help .. If you are gonna try to ride on the street then go with 42.5 pilot jets .
Mark O.
86 fj1200
sac ca.

                           " Get off your ass and Ride"

fj1289

As an alternative to buying new filters you can try uni outer wraps over the K&Ns

copper

From my understanding the backspray from the carbs hits the plate on this style of filter, accumulates- runs down, and washes away everything underneath... So adding a layer that would also be washed away wouldn't really be saving any money or causing any less wear too the motor. As Pat said go back to the stock box or put the proper pod filters on.

FjFighter86

Quote from: copper on April 27, 2015, 10:07:26 PM
From my understanding the backspray from the carbs hits the plate on this style of filter, accumulates- runs down, and washes away everything underneath... So adding a layer that would also be washed away wouldn't really be saving any money or causing any less wear too the motor. As Pat said go back to the stock box or put the proper pod filters on.

Then what would you consider "proper" pods?

FjFighter86

I plan on getting rid of the whole rear subframe and building a new design, so the stock box isn't an option.

copper

Either the Dual pod from RPM or foam type. Nothing with a backing plate like the k&n.

Harvy

As Copper says...... Uni Dual pods are the way to go:

.


Either from Uni on this page about 2/3 the way down:

http://www.unifilter.com/clamp-on/

In the US best bet is Randy at RPM

Harvy
FJZ1 1200 - It'll do me just fine.
Timing has much to do with the success of a rain dance.

FjFighter86

Quote from: copper on April 28, 2015, 12:17:33 AM
Either the Dual pod from RPM or foam type. Nothing with a backing plate like the k&n.

Ahh okay okay much appreciation guys. Ordering some this week.