News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

Alternator torque?

Started by thich, May 25, 2017, 09:20:03 AM

Previous topic - Next topic

thich

i just replaced the o-ring on the alternator, and i cant find a torque spec for the bolts. any ideas?
Cheers

FJmonkey

The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

aviationfred

Quote from: thich on May 25, 2017, 09:20:03 AM
i just replaced the o-ring on the alternator, and i cant find a torque spec for the bolts. any ideas?


The torque is 25nm or 18ftlbs according to the Haynes maintenance manual.



Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

FJmonkey

The chart I posted has an M8 thread at 18.75 FT/LB, close enough.
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

thich

thank you both. i appreciate it
Cheers