News:

This forum is run by RPM and donations from members.

It is the donations of the members that help offset the operating cost of the forum. The secondary benefit of being a contributing member is the ability to save big during RPM Holiday sales. For more information please check out this link: Membership has its privileges 

Thank you for your support of the all mighty FJ.

Main Menu

FZ1 Swing Arm Install

Started by aviationfred, March 29, 2018, 09:40:37 PM

Previous topic - Next topic

Pat Conlon

The taller box section of the FZ1 swinger vs brake line will change things..... Just be aware.
I've never liked how you guys run the brake line on the GSXR rim swap with the under slung caliper.

Speaking of rear GSXR rims, how does the center line of the back tire line up with the front?
Is there an offset?
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

aviationfred

Quote from: Pat Conlon on April 02, 2018, 11:02:26 PM

Speaking of rear GSXR rims, how does the center line of the back tire line up with the front?
Is there an offset?

I have actually done a true wheel alignment yet. It will be done before it hits the road. As it sits.... my calibrated eye ball shows the alignment is dead centered.  :biggrin:


Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

ribbert

Quote from: Pat Conlon on April 02, 2018, 11:02:26 PM

I've never liked how you guys run the brake line on the GSXR rim swap with the under slung caliper.


No offense to the guys who've done it, but I agree with Pat. To me it looks like an after thought.
"Tell a wise man something he doesn't know and he'll thank you, tell a fool something he doesn't know and he'll abuse you"

FJ_Hooligan

Fred,
Did you consider using the hugger fender/chain guard with the FZ1 swingarm?
DavidR.

Pat Conlon

Yea, I was thinking the same thing David.

Pyramid Plastics (UK) makes some neat things for the Fazer.....


Looks like the listing for the FZ1 huggers are for the later model swing arms.

https://www.pyramid-plastics.co.uk/accessory.html?h=16_100436&accessoryCode=528&d=FAZER+1000+BLACK+HUGGER&partNumber=07219A
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

aviationfred

The swing arm mod is complete. New exhaust installed and all clearance issues resolved. I still need to verify how centered the rear wheel is.

Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

Country Joe

1993 FJ 1200

fj1289

Fred, where did you get the Gunfighter & Lady recovered?


aviationfred

Quote from: fj1289 on April 10, 2018, 10:19:29 PM
Fred, where did you get the Gunfighter & Lady recovered?



A local upholstery shop. I had them cut the passenger section down a bit and square it a little. Removed some foam on the sides to narrow the seat up front.

Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

aviationfred

I did an alignment check of the rear wheel. It is almost perfectly centered. 1/16 of an inch to the right


Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

Pat Conlon

Thanks Fred!
Good news.....that's much better than 3/4" someone reported.

Did you measure with 2 straight edges?
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Country Joe

1993 FJ 1200

aviationfred

Quote from: Pat Conlon on April 11, 2018, 08:18:39 PM
Thanks Fred!
Good news.....that's much better than 3/4" someone reported.

Did you measure with 2 straight edges?


I used a center line and the string method.

Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor