News:

           Enjoy your FJ


Main Menu

Horrible vibration while cruising

Started by Mike m, July 17, 2018, 05:57:35 PM

Previous topic - Next topic

Urban_Legend

Hey Pat

The swing arm on my 84 had needle bearings (yes it was the original item).
Mark
My Baby (Sparkles)
84 FJ1100/1200 motor
92 FJ 1200 - Project bike. Finished and sold.
84 FJ1100 - Project bike.

Mike m

Maybe your swing arm isnt oem as senior members knowledge is holy grail.partzilla shows a 84 as have g needle bearings

Sparky84

Quote from: Urban_Legend on July 22, 2018, 06:44:38 PM
Hey Pat

The swing arm on my 84 had needle bearings (yes it was the original item).

Are You Absolutely Sure its the Only thing then..

For memory when I had my 84 apart this year for greasing of all linkages and replacement of bearings,
Swing Arm are Needle but Linkages are Nylon.
1984 FJ1100
1979 Kawasaki Z1300
1972 Honda CB750/4 K2

Pat Conlon

Quote from: Mike m on July 22, 2018, 06:47:46 PM
Maybe your swing arm isnt oem as senior members knowledge is holy grail.partzilla shows a 84 as have g needle bearings

Just so we are singing the same song.... I'm talking about the '84/85 swing arm linkage.

https://www.partzilla.com/catalog/yamaha/motorcycle/1984/fj1100l/swing-arm

^^^^ See parts #10 #15 and #21 Sure Looks like nylon bushings to me.

I've owned my '84 for a few years now, so I'm not dreaming this shit up.
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

TexasDave

Most of the Japanese bikes manufactured in the 70's and early 80's came with nylon swing arm bushings. I replaced the nylon bushings on my 1981 Yamaha XS650 with bronze ones from an aftermarket supplier. Does anyone make bronze replacement bushings for the early FJ's?

Dave
A pistol is like a parachute, if you need one and don't have one you will never need one again.

Pat Conlon

Don't know about brass replacements Dave.
Someone posted last week something about using needle bearings out of a Kawasaki or Honda as a retrofit for the Yamaha nylon bushings....

....Or just buy the linkage off a '86/87

1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Urban_Legend

 Could be my mistake. Not enough sleep and misreading your post. I know I had pin bearings as they ended up on my shed floor. But were from the main pivot point.it was 3 years and many other mods ago.

Mark
Mark
My Baby (Sparkles)
84 FJ1100/1200 motor
92 FJ 1200 - Project bike. Finished and sold.
84 FJ1100 - Project bike.

Pat Conlon

No worries Mark! All good..

I would like to do a write up on what to use for replacing the nylon bushings for the 84/85 folks.

Those bushings ain't getting any younger.
1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Mike m

I wasnt on the same page I think the shock linkage is what your refering to

FJmonkey

If I can get an old set of bearings I can see if the sizes are available from my bearing supplier. They have composite bearings that are better than the old Nylon ones of old. Anyone have a set I can borrow?
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

ribbert

I've long thought bushes (not nylon) would work much better here than needle rollers, like king pin bushes and for the same reason.

One of the problems is that the swing arm only rotates through a few degrees and as such leads to this sort of damage.



Noel

"Tell a wise man something he doesn't know and he'll thank you, tell a fool something he doesn't know and he'll abuse you"

Old Rider

Did they balance the wheel? first i would check if there are some new weights on the rim if not they didn't.I have heard people saying that its not necessary to balance a motorcycle wheel that's bullshit!.
You can easily balance the wheel yourself just  take it off run the axlebolt Thru and hang it between 2 carstands or chairs hanging on the axle ends (it also helps if you have some old wheelbearings on the axle ).Then you rotate the wheel slowly and se if it have a heavy point .Then if it has you add balance weights on the opposite side (upper side) until its gone.Mayby a bad explanation but google it ...
I have had bad vibrations at higher speed that was caused by unbalanced wheel.

Mike m

As I orderd my swing arm bushing from rpm along with the brass bushing in the clutch handle assembly.I've dicoverd my vibration was from my #4 carb pilot jet had what I think is a piece of rubber from my fuel line in it.all's good