News:

           Enjoy your FJ


Main Menu

pucks or crash bars?

Started by mtc, April 03, 2019, 02:27:32 PM

Previous topic - Next topic

mtc

Quote from: FJmonkey on April 03, 2019, 11:27:17 PM
I prefer to call them engine/case guards but the Renntec bars from RPM are worth every cent spent. I have seen them put to use so much on one FJ they had to be welded to close up the tubes. Every time the FJ was still ride-able and got the owner home. How much will a tow truck cost? The hassle of getting your bike home on a trailer? I have had a few zero speed drops and one low speed slide on mine. Worth the cost by way more than I spent.  Any protection you can add is good.

yeah less negative connotation vs crash
Current
1985 FJ1100

Previous Bikes
1979 Yamaha XS1100 best one
1984 FJ1100
1987 FZR600
1987 Fazer
1985 Vision
1982 Seca 750
1978 RD400 Spec II Motor

Live Life Wrong and Perspire

andyoutandabout

Along with my particular tire pressures, I stick with those solid engine bars, DID chains, Michelin tires, RPM fork braces, RPM valves and blue dot calipers. Now you know the winning formula.
life without a bike is just life

aviationfred

The renntec bars are the go to protection for the FJ engines. As shown in earlier comments, they are well worth the investment. I work nights and once or twice a year do extended rides well into the night. They Renntec bars are a great place to mount Auxiliary lights.




Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

mtc

Quote from: aviationfred on April 05, 2019, 12:30:28 AM
The renntec bars are the go to protection for the FJ engines. As shown in earlier comments, they are well worth the investment. I work nights and once or twice a year do extended rides well into the night. They Renntec bars are a great place to mount Auxiliary lights.




Fred

cool who takes the pictures?
Current
1985 FJ1100

Previous Bikes
1979 Yamaha XS1100 best one
1984 FJ1100
1987 FZR600
1987 Fazer
1985 Vision
1982 Seca 750
1978 RD400 Spec II Motor

Live Life Wrong and Perspire

aviationfred

Quote from: mtc on April 05, 2019, 01:25:30 AM
Quote from: aviationfred on April 05, 2019, 12:30:28 AM
The renntec bars are the go to protection for the FJ engines. As shown in earlier comments, they are well worth the investment. I work nights and once or twice a year do extended rides well into the night. They Renntec bars are a great place to mount Auxiliary lights.




Fred

cool who takes the pictures?



During FJ Rally's, it has been known that fellow owner or a Pillion rider will position themselves ahead of a ride group and take photos as riders pass by. In this case, there are a few destination roads that are real curvy and attract a lot of riders. Online based photography company's station professional photographers at multiple corners on these very popular roads. You ride the road, the photographers take photos of every vehicle that comes along and later in the day post the photos on their website. You go to their website and find photos of yourself. Pay a fee and download the photos.


Here is a photo with the online company's logo. Riding US 129, Tail of the Dragon in Tennessee

Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

1tinindian

Quote from: Firehawk068 on April 03, 2019, 11:51:45 PM
I will "Third" those Renntec Crash-Bars..................Allowed me to ride my FJ back to the Hotel, and then 4-hours back to my Car/Trailer after my "Crash"
What a memory that was!
"I want to be free to ride my machine without being hassled by the "man"!
91 FJ1200

ZOA NOM

Quote from: aviationfred on April 05, 2019, 12:30:28 AM
The renntec bars are the go to protection for the FJ engines. As shown in earlier comments, they are well worth the investment. I work nights and once or twice a year do extended rides well into the night. They Renntec bars are a great place to mount Auxiliary lights.




Fred


Shift worker here too... Oh, and you only need to drop the bike on it's side once to convince you the bars are the way to go.



Rick

Current:
2010 Honda VFR1200 DCT (Full Auto!)
1993 FJ/GSXR 1200 (-ABS)
1987 Porsche 911 Carrera (Race)
1988 Porsche Carrera (Street)
Previous:
1993 FJ1200 (FIREBALL)
1993 FJ1200ABS (RIP my collar bone)
1986 FZ750
1984 FJ600
1982 Seca

Firehawk068

Quote from: 1tinindian on April 05, 2019, 10:17:51 AM
What a memory that was!

That was a Cold, Foggy ride back to Iowa!
Alan H.
Denver, CO
'90 FJ1200

GS Jockey

Engine bars every time for me. My mate Linda managed to slide my 3CV down the road at around 30mph a few years back. As well as saving a severe dose of 'Gravel rash' to the (L/H) signal cover, they held the downed bike up off her left leg, enabling the bike to slide away from her as her bike trousers slowed her down. We dusted her down, picked the bike up, she got back on it and rode it home.

I can't ever imagine 'pucks' giving that level of protection. Oh, and as mentioned above, they're good for fixing farkles to. :good:
Unfortunately I am no longer young enough to know everything...

mtc

ok ready to buy and protect the fj investment but they are in back order
Current
1985 FJ1100

Previous Bikes
1979 Yamaha XS1100 best one
1984 FJ1100
1987 FZR600
1987 Fazer
1985 Vision
1982 Seca 750
1978 RD400 Spec II Motor

Live Life Wrong and Perspire

racerrad8

Quote from: mtc on April 15, 2019, 12:13:20 PM
ok ready to buy and protect the fj investment but they are in back order

They're in stock. Someone started two carts and added them every time to the new cart. They completed one cart so I have deleted the other cart they started.

There is a set on the shelf.

Plus, we order Renntec every week. So unless they are on back-order from them they are never more than a week away.

Randy - RPM
Randy - RPM

mtc

Quote from: racerrad8 on April 15, 2019, 04:53:04 PM
Quote from: mtc on April 15, 2019, 12:13:20 PM
ok ready to buy and protect the fj investment but they are in back order

They're in stock. Someone started two carts and added them every time to the new cart. They completed one cart so I have deleted the other cart they started.

There is a set on the shelf.

Plus, we order Renntec every week. So unless they are on back-order from them they are never more than a week away.

Randy - RPM

Done, got the fork brace as well, i have the double banjo for the front brakes at the tree, will the brace slam into that anytime soon?
Current
1985 FJ1100

Previous Bikes
1979 Yamaha XS1100 best one
1984 FJ1100
1987 FZR600
1987 Fazer
1985 Vision
1982 Seca 750
1978 RD400 Spec II Motor

Live Life Wrong and Perspire

aviationfred

Quote from: mtc on April 15, 2019, 06:26:34 PM
Quote from: racerrad8 on April 15, 2019, 04:53:04 PM
Quote from: mtc on April 15, 2019, 12:13:20 PM
ok ready to buy and protect the fj investment but they are in back order

They're in stock. Someone started two carts and added them every time to the new cart. They completed one cart so I have deleted the other cart they started.

There is a set on the shelf.

Plus, we order Renntec every week. So unless they are on back-order from them they are never more than a week away.

Randy - RPM

will the brace slam into that anytime soon?

On my 89 model, I had installed the RPM fork brace after I had installed upgraded brake components. With the Stock forks and probably the original forks springs, the Horn/bracket did make contact with the fork brace under heavy braking. Enough so that the horn bracket broke.

This is not to say that anything is wrong with the RPM fork brace, or it's design. The Horn/bracket contacting the fork brace showed me 2 things. 1st, The brake upgrade that I did actually provided better stopping power by collapsing the fork springs enough to make contact. 2nd, It showed me that the springs were worn out and needed to be replaced. I installed a set of .85kg Race Tec springs and the RPM fork valves. Problem solved.


Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

mtc

i need help , i bought them but they don't sit flush were it butts up against the frame in the back, i am thinking the flexing is going to chafe the bars and the frames

has anyone had this problem? and it appears it needs a spacer, and it going to end up sticking  out a lot, it doesn't seem right to me.....please assist

Randy sent me pictures of them mounted, anyone can send me a picture of what it should look like?

the read stand-off is too large and it's pushing the bar too far out, i think :dash1:



Current
1985 FJ1100

Previous Bikes
1979 Yamaha XS1100 best one
1984 FJ1100
1987 FZR600
1987 Fazer
1985 Vision
1982 Seca 750
1978 RD400 Spec II Motor

Live Life Wrong and Perspire

Hersey289

 They will fit fine. Just start all the bolts so all are loose , then start evenly tightening all of them. The rear plate section that you are concerned with will conform/bend slightly to fitup to the frame. That is my experience with installing them on my '85.

Hope this helps,
Rob