News:

           Enjoy your FJ


Main Menu

gas tank heat shield

Started by Fred, March 20, 2009, 08:54:19 PM

Previous topic - Next topic

Fred

Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

Yamifj1200

Quote from: Fred on March 20, 2009, 08:54:19 PM
Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

3M spray adhesive will work... hth

Eric M


http://www.fjowners.com/index.php?topic=14833.0


"All unattended children will be served an espresso and given a puppy"

Fred

Quote from: Yamifj1200 on March 20, 2009, 09:12:26 PM
Quote from: Fred on March 20, 2009, 08:54:19 PM
Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

3M spray adhesive will work... hth

Eric M

Is it a particular type?

Yamifj1200

Quote from: Fred on March 21, 2009, 10:26:48 AM
Quote from: Yamifj1200 on March 20, 2009, 09:12:26 PM
Quote from: Fred on March 20, 2009, 08:54:19 PM
Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

3M spray adhesive will work... hth

Eric M

Is it a particular type?

Check out your local Lowe's store and look at the spray adhesives. There are a few to choose from I used a high strength version..

Eric M


http://www.fjowners.com/index.php?topic=14833.0


"All unattended children will be served an espresso and given a puppy"

jamesearthdrum

No. 77 very good  :good:
No. 90 will never come off  :good2:
peace:)james

"we often refuse to accept an idea merely because the tone of voice in which it has been expressed is unsympathetic to us."
~~~friederich nietzsche ~~~

rlucas

Quote from: Yamifj1200 on March 21, 2009, 10:56:16 AM
Quote from: Fred on March 21, 2009, 10:26:48 AM
Quote from: Yamifj1200 on March 20, 2009, 09:12:26 PM
Quote from: Fred on March 20, 2009, 08:54:19 PM
Anyone have any recommendations on what to use to keep the heat sheild attached to the tank? :scratch_one-s_head:

TIA

3M spray adhesive will work... hth

Eric M

Is it a particular type?

Check out your local Lowe's store and look at the spray adhesives. There are a few to choose from I used a high strength version..

Eric M

Or any NAPA store with 3M trim adhesive. I cheated and used foil-faced adhesive-backed pipe insulation, layered. So far (several years...), so good. Not optimum, but it works.

Rossi
We're not a club. Clubs have rules. Pay dues. Wear hats and shit.

"Y'all might be faster than me, but you didn't have more fun than I did." Eric McClellan (RIP '15)