FJowners.com

General Category => Parts Available and/or For Sale => Topic started by: FJ-Heretic on September 30, 2017, 03:46:55 PM



Title: New Member - I have 1986 FJ1200 parts for sale
Post by: FJ-Heretic on September 30, 2017, 03:46:55 PM
Hi everyone, in February I bought an entire 1986 FJ 1200 for the purpose of using the
rolling chassis for my custom project bike. I have removed almost all of the components
that I will not be using. The "kid".....actually SQUID said he last rode the bike in November 2016.
So, as you can imagine, it is a complete bike. I have parts that may help you with your project.
Ignition, complete wiring harness, complete set of carbs, motor that could be used for parts or fixed.
Complete stock exhaust system, hand controls, ignition switch w/key, Givi luggage rack to mount hard box.
I'm obviously keeping the items that are vital to my project (frame, swing arm, front end, fuel tank etc.) The
rest needs to help other FJ owners. If you have a specific need, send me a message and we can see if I can help.
Thanks for reading.   


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: lazercobra on October 09, 2017, 08:31:12 AM
Hi everyone, in February I bought an entire 1986 FJ 1200 for the purpose of using the
rolling chassis for my custom project bike. I have removed almost all of the components
that I will not be using. The "kid".....actually SQUID said he last rode the bike in November 2016.
So, as you can imagine, it is a complete bike. I have parts that may help you with your project.
Ignition, complete wiring harness, complete set of carbs, motor that could be used for parts or fixed.
Complete stock exhaust system, hand controls, ignition switch w/key, Givi luggage rack to mount hard box.
I'm obviously keeping the items that are vital to my project (frame, swing arm, front end, fuel tank etc.) The
rest needs to help other FJ owners. If you have a specific need, send me a message and we can see if I can help.
Thanks for reading.   

Do you have the lower bellpan to sell? Thnx


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: retcol on October 10, 2017, 08:48:52 PM
what would you take for the carb set shipped to 78015?


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: aviationfred on October 12, 2017, 12:19:25 AM
Givi luggage rack to mount hard box.

Thanks for reading.   


Is this just the rear rack or is it the complete Wingrack set up that side cases can be attached?


Fred


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: FJ-Heretic on October 26, 2017, 04:46:21 PM
Hey guys, sorry for the delay. I was busy for a couple of weeks and then I left for Scotland for 2 weeks and just got back home.
LAZERCOBRA: Bellypan is junk! sorry
RETCOL: Give me a chance to see what USPS would cost. They are the cheapest means for shipping.
AVIATIONFRED: The Givi is just for mounting a top box, no side luggage hardware. Thanks FJ-H


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: ryanschoebel on October 26, 2017, 08:02:41 PM
When you say hand controls, are you referring to turn signal switches, ect? If so, do you know if they would fit an 85 fj1100?


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: FJmonkey on October 26, 2017, 10:03:47 PM
'86 is second generation, hand controls are different.


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: FJ-Heretic on October 27, 2017, 01:17:25 PM
what would you take for the carb set shipped to 78015?
I just got a quote from USPS. $27.80 to ship from my zip to yours. For round numbers and reasonable price
how about $122.20 for the carbs + $27.80 for shipping for a grand total of $150.00. If you're interested, you could PM me
and we can make arrangements. Thanks for inquiring. FJ-H


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: 86 the cool ride on February 12, 2018, 06:03:02 PM
Looking for a couple of things to complete my bike the way it ways when i first saw it on the showroom floor.    Need left and right air scoops and the black beauty covers that cover the mounting screws.  Really only need right side but will take both sides just because.    Thanks



Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: FJ1100mjk on February 12, 2018, 06:36:08 PM
Looking for a couple of things to complete my bike the way it ways when i first saw it on the showroom floor.    Need left and right air scoops and the black beauty covers that cover the mounting screws.  Really only need right side but will take both sides just because.    Thanks

If the OP, doesn't respond to your inquiry, or doesn't have what you're needing, shoot me a PM. I have the items.


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: racerrad8 on February 13, 2018, 11:51:18 AM
... and the black beauty covers that cover the mounting screws.  Really only need right side but will take both sides just because.    Thanks


If the OP, doesn't respond to your inquiry, or doesn't have what you're needing, shoot me a PM. I have the items.


And if Marty doesn't have what you need, the fairing screw covers are available brand new at RPM (http://www.rpmracingca.com/) .

86-87 Left Side Fairing Protector 1 (http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87L%2FSProtector)
86-87 Right Side Fairing Protector 2 (http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87R%2FSProtector)

Randy - RPM (http://www.rpmracingca.com/)


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: FJ1100mjk on February 13, 2018, 12:39:15 PM
If the OP, doesn't respond to your inquiry, or doesn't have what you're needing, shoot me a PM. I have the items.


And if Marty doesn't have what you need, the fairing screw covers are available brand new at RPM ([url]http://www.rpmracingca.com/[/url]) .

86-87 Left Side Fairing Protector 1 ([url]http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87L%2FSProtector[/url])
86-87 Right Side Fairing Protector 2 ([url]http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87R%2FSProtector[/url])

Randy - RPM ([url]http://www.rpmracingca.com/[/url])


As I stated, I have the items. I can also beat RPM prices.  :lol:


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: racerrad8 on February 13, 2018, 01:56:18 PM
If the OP, doesn't respond to your inquiry, or doesn't have what you're needing, shoot me a PM. I have the items.


And if Marty doesn't have what you need, the fairing screw covers are available brand new at RPM ([url]http://www.rpmracingca.com/[/url]) .

86-87 Left Side Fairing Protector 1 ([url]http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87L%2FSProtector[/url])
86-87 Right Side Fairing Protector 2 ([url]http://www.rpmracingca.com/proddetail.asp?prod=M%2FC%3A86-87R%2FSProtector[/url])

Randy - RPM ([url]http://www.rpmracingca.com/[/url])


As I stated, I have the items. I can also beat RPM prices.  :lol:


Yes, I am sure you can beat the price...

but he is looking for showroom quality as the day when he first laid eyes on his FJ in the showroom... :bomb:

Randy - RPM


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: FJ1100mjk on February 13, 2018, 04:50:08 PM

As I stated, I have the items. I can also beat RPM prices.  :lol:

Yes, I am sure you can beat the price...

but he is looking for showroom quality as the day when he first laid eyes on his FJ in the showroom... :bomb:

Randy - RPM

Touche'  :flag_of_truce:


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: 1TX650 on May 12, 2020, 09:45:24 AM
Hi, came across this post and realize it's been out there a while.  I'm looking for a VG to excellent right side panel (the one between the fair in tank for my '86 FJ.  Have you got one?  if so, what do you want for it?  Also could you post a picture. Thanks! :crazy:


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: doughtys on March 13, 2021, 10:35:14 AM
Is it possible that you might have a complete airbox?  I know this is an old post, but I am on the hunt for my '84 Fj1100 to go back to stock.


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: Diddly on April 10, 2021, 02:14:18 PM
Hi everyone, in February I bought an entire 1986 FJ 1200 for the purpose of using the
rolling chassis for my custom project bike. I have removed almost all of the components
that I will not be using. The "kid".....actually SQUID said he last rode the bike in November 2016.
So, as you can imagine, it is a complete bike. I have parts that may help you with your project.
Ignition, complete wiring harness, complete set of carbs, motor that could be used for parts or fixed.
Complete stock exhaust system, hand controls, ignition switch w/key, Givi luggage rack to mount hard box.
I'm obviously keeping the items that are vital to my project (frame, swing arm, front end, fuel tank etc.) The
rest needs to help other FJ owners. If you have a specific need, send me a message and we can see if I can help.
Thanks for reading.   
Hi interested in luggage rack and belly pan if you have those available? Thanks


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: r.e.wing_fc3s on April 11, 2021, 09:18:37 PM
any chance you have any of the factory toolkit remaining? im looking for the spark plug "socket" which is one of the sheet metal type sockets with a hole in the side 18mm


Title: Re: New Member - I have 1986 FJ1200 parts for sale
Post by: Wilson Perf. on April 29, 2021, 12:12:39 PM
Do you have any of the Givi parts left?

Regards,
Bill W.
816-377-3185