I'm looking for something like I have circled in the picture for my RPM oil cooler lines. This would be an upgrade over a zip tie. Example photo attached.
Any suggestions?
A professional machine shop will make 1000 for you, but they won't make one. No profit in it. Find somebody with a machine shop in their garage. Possibly ask here: https://bbs.homeshopmachinist.net/
I cross my lines so they do not come near the header tubes.
Quote from: CutterBill on April 30, 2021, 02:13:30 PM
A professional machine shop will make 1000 for you, but they won't make one. No profit in it. Find somebody with a machine shop in their garage. Possibly ask here: https://bbs.homeshopmachinist.net/ (https://bbs.homeshopmachinist.net/)
Drill and hacksaw and file and a tap - no machine shop needed!
Added: Or an off the shelf solution: https://www.summitracing.com/parts/ear-167503erl?seid=srese1&gclid=Cj0KCQjw1a6EBhC0ARIsAOiTkrES1ehJaLvsMCnqKxJCLrxAqwEH2Fc4b_G-0lMJors7dkRQ1e_XHpUaAupQEALw_wcB (https://www.summitracing.com/parts/ear-167503erl?seid=srese1&gclid=Cj0KCQjw1a6EBhC0ARIsAOiTkrES1ehJaLvsMCnqKxJCLrxAqwEH2Fc4b_G-0lMJors7dkRQ1e_XHpUaAupQEALw_wcB)
Added again: or contact Robert - they may have something they use in the cars that's not listed on the website
Earl's was the first thing I thought of when I saw it. I would go for one of the cheaper Russell's. Myself. I like the way they look better anyway.
Plenty happy to give some business to Earl's. What is the outside diameter of the RPM oil cooler lines?