News:

         
Welcome to FJowners.com


It is the members who make this best place for FJ related content on the internet.

Main Menu

Rear saddle bag mount help.

Started by jagcofj, August 12, 2016, 03:43:18 PM

Previous topic - Next topic

jagcofj

This is what I came up with so far, sheet of aluminum 8m x 70m pitch 1.50 screws 6 nuts and 6 washers parts I had laying around. I drilled extra small holes with nuts sealed to the bottom side of the aluminum, if i need to expand it longer or wider with more aluminum and screws. I took a test ride with 10 pounds on the back of the rack it stayed in-place no bending down. I think at the most 8 pounds will be back there. Later on I will make it a little better.