News:

           Enjoy your FJ


Main Menu

Am I missing something? Fairing piece

Started by Dub, May 03, 2021, 03:11:56 PM

Previous topic - Next topic

Dub

AS I am buttoning up my project, I noticed the underside of the cowl has indents for what looks to be a plastic panel. When I got the bike the windshields that I was given for it were in a bag so I didnt notice it. In the attached diagram, the highlighted area reps where the panels would be. These do not show up on most parts lists so I was wondering if they exist at all and I am missing mine or if they are just a figment of my imagination.





Thanks,
Dub
89 FJ1200
08 KLR 685
78 BMW R100/7
12 Kawie Brute Force 650

Old Rider

The parts diagram is for a FZ 750  do you have a FZ cowling ?

Anyway here is a link for the 89 cowling diagram : https://www.cmsnl.com/yamaha-fj1200-1989-k-usa_model9471/partslist/G-12.html

Dub

Realize the image isnt an FJ cowling.

Doesnt change the question however. Do these exist or not?
89 FJ1200
08 KLR 685
78 BMW R100/7
12 Kawie Brute Force 650

Pat Conlon

Yes they exist....go to the Cowling 2 diagram, they are #15 and 16

1) Free Owners Manual download: https://tinyurl.com/fmsz7hk9
2) Don't store your FJ with E10 fuel https://tinyurl.com/3cjrfct5
3) Replace your old stock rubber brake lines.
4) Important items for the '84-87 FJ's:
Safety wire: https://tinyurl.com/99zp8ufh
Fuel line: https://tinyurl.com/bdff9bf3

Dub

Thank You Pat.  Appreciate the response.
89 FJ1200
08 KLR 685
78 BMW R100/7
12 Kawie Brute Force 650

FJmonkey

These are on the growing list of Unobtanium. 
The glass is not half full, it was engineered with a 2X safety factor.

'86 Ambulance - Bent frame, cracked case, due for an overhaul
'89 Stormy Blue - Suits my Dark Side

Dub

Yeah, I can see that. Looks like I am going to have to design and print or cast some of my own variety for the time being. Maybe I will make one with a ram ball mount integrated towards the base at the lower mounting hole.   
89 FJ1200
08 KLR 685
78 BMW R100/7
12 Kawie Brute Force 650

Waiex191

For some reason I'm missing one.  It would be a good part to design and print.
Bryan
1989 FJ1200
1981 Suzuki GN400
Poplar Grove, IL
 

aviationfred

Quote from: Waiex191 on May 03, 2021, 06:44:11 PM
For some reason I'm missing one.  It would be a good part to design and print.


For reasons unknown...... the right side pieces are often on eBay..... But the left ones are nearly impossible to find.




Fred
I'm not the fastest FJ rider, I am 'half-fast', the fastest slow guy....

Current
2008 VFR800 RC46 Vtec
1996 VFR750 RC36/2
1990 FJ1300 (1297cc) Casper
1990 VFR750 RC36/1 Minnie
1989 FJ1200 Lazarus, the Streetfighter Project
1985 VF500F RC31 Interceptor

giantkiller

Yes they are hard to find as soon as I saw Pete had 2 for sale I jumped on them thanks Pete.  Even though I had already found a  pair for my 89. Seems like I might have gotten them from Fred. Or else you posted when they came up. It's been a while. Pat's new 89 is missing both. I saved a picture of the bike. From when it was still at the seller's  just so he doesn't think I pirated them. Lol.
86 fj1350r
86 fj1380t turbo drag toy (soon)
87 fj1200 865 miles crashed for parts
89 fj1200 touring 2up
87 fzr1000 crashed
87 fzr750r Human Race teams world endurance champion
93 fzr600 Vance n hines ltd for sale
Custom chopper I built
Mini chopper I built for my daughter just like the big 1

Urban_Legend

There is a guy on the Fake Book FJ page that is in the process of producing Carbon Fibre replacement parts for the infill panels of the fairings. He has done some 1TX panels so far. We can only hope that these parts are on his list of things to do. He is working on the dash/gauge surround at the moment.
Mark
My Baby (Sparkles)
84 FJ1100/1200 motor
92 FJ 1200 - Project bike. Finished and sold.
84 FJ1100 - Project bike.

Dub

Thanks for the heads up Urban. If you see progress on his part, please share. However, not sure I want to wait till someone gets around to it. I have a need now so I might be a bit more inclined to act sooner rather than later or fabricate a support piece to secure the windshield to.

I dont have a set to make molds from so I will need to measure and create in Fusion360. Then I can print either a part or a mold for a part. That might be an opportunity to try the carbon fiber filament.

I have some flexible material so I am doing the rubber fuse holder block first.

89 FJ1200
08 KLR 685
78 BMW R100/7
12 Kawie Brute Force 650